Ten SCSI2SD V5.2 adapters, with a 50 pin IDC male SCSI connector.

SCSI2SD V5.2 is an evolution of the SCSI2SD V5.1 hardware design, and is based on the same firmware as its predecessors (V5.0 and V5.1)

Termination is software-controlled (using scsi2sd-util)

2x SCSI2SD v5.2 adapters. Fully assembled, no SD cards included.

Free shipping applies only to US domestic orders shipped to destinations within the continental United States.

2x SCSI2SD v5.1 adapters. Fully assembled, no SD cards included.

Free shipping applies only to US domestic orders shipped to destinations within the continental United States.

SCSI2SD V6 Rev 2020 has been superceeded by SCSI2SD Rev 2021

An internal variant of SCSI2SD V5.5, suitable for use with Apple Macintosh PowerBook laptops.  This board replaces the 2.5" SCSI hard drive found in Apple PowerBook laptops.

SCSI2SD emulates a SCSI-2 hard drive using a micro-SD memory card. Each SCSI2SD purchase includes a fully assembled and tested circuit board, ready for use.

A SCSI to SD memory card adapter to suit Apple PowerBook laptops.  This board replaces the 2.5" SCSI hard drive found in Apple PowerBook laptops.

SCSI2SD emulates a SCSI-2 hard drive using a micro-SD memory card. Each SCSI2SD purchase includes a fully assembled and tested circuit board, ready for use.

SCSI2SD V5.5 is designed as a simple external "direct attach" device, that plugs directly into the back of your old machine or sampler. No cables required.

The board and case (included) have been designed to fit the Apple "pizza box" cases (https://en.wikipedia.org/wiki/Macintosh_LC) but is generally compatible with all SCSI Macs (and other devices) with a rear-facing DB25 SCSI port.

SCSI2SD is a solid state drop-in replacement for legacy SCSI hard drives, and enables emulation of hard drives, CD-ROM drives, and removable media such as ZIP/Jaz drives.

Termination is software-controlled (via scsi2sd-util)

SCSI2SD V5.1 continues the "V5" family, and is based on the same firmware and hardware as V5, but adds a full size SD card slot, and a DB25 pin header for direct installation of an external SCSI connector.

SCSI termination is software-controlled (using scsi2sd-util)

SCSI2SD is a solid state drop-in replacement for legacy SCSI hard drives, and enables emulation of hard drives, CD-ROM drives, and removable media such as ZIP/Jaz drives.

One SCSI2SD V5.2 with a 3D-printed 5.25" drive bay mounting bracket

SCSI2SD is a solid state drop-in replacement for legacy SCSI hard drives, and enables emulation of hard drives, CD-ROM drives, and removable media such as ZIP/Jaz drives.

This V5 SCSI2SD adapter includes a microSD card configured to be an exact drop-in replacement for a Seagate ST3550N, with the same vendor, Device ID, and sector count (891,574) as the original

SCSI2SD V5.5 version is designed as a simple external drive that plugs directly into the back of your old machine or sampler. No cables required. It has a microSD slot and does not accept full size SD cards.

The board and case (included) have been designed to fit the Apple "pizza box" cases (https://en.wikipedia.org/wiki/Macintosh_LC) but is generally compatible with all SCSI Macs (and other devices) with a rear-facing DB25 SCSI port.

One SCSI2SD V5.2 adapter, with a 50 pin IDC male SCSI connector.

SCSI2SD V5.2 is an evolution of the SCSI2SD V5.1 hardware design, and is based on the same firmware as its predecessors (V5.0 and V5.1)

Termination is software-controlled (using scsi2sd-util)

Quantity five black 3.5" mounting bracket for both SCSI2SD V6 V5.2, and V5.1. Includes mounting hardware.

White 3.5" mounting bracket for both SCSI2SD V6 and V5.1.
Injection Molded ABS. Takes spray paint well, can be painted to any desired color.
Includes mounting hardware.

Black 3.5" mounting bracket for both SCSI2SD V6 and V5.2/V5.1. Includes mounting hardware.

This adapter allows SCSI2SD V5.0, V5.1, V5.2, and V6 to be used externally.

This adapter allows you to power a SCSI2SD V5.1, V5,2, or V6, with its 4-pin Floppy-style (Berg) connector, from a Molex-style connector.

$2.50 per board