Home > SCSI2SD >

SCSI2SD V6 Rev. C



 
Our Price: $98.00

Quantity in Stock:64
Availability:: Usually Ships in 24 to 48 Hours
Product Code: SCSI2SD-V6-REVC


SD Card:
  

Qty:  
Description
 

SCSI2SD emulator/SSD, version 6, Revision C

These are from the same production run of boards that are available from the Australian shop.codesrc.com, operated by the creator of the SCSI2SD, Michael McMaster.

Differences from the older V5 board:

  • Full-Size SD slot. This makes it much easier to develop faceplates for external access.
  • A floppy-style berg power connector is used instead of the traditional Molex plug. This reduces the width of the device, simplifying 3.5" bracket production. Most systems can self-power the board and don't need a separate power cable anyway.
  • Better performance. The hardware supports synchronous transfers at 10MB/s.
  • Access to the data via USB. The SCSI2SD drives will appear when connected to a PC via USB. This is limited to around 1.2MB/s (USB FS speeds).
  • Superior noise resistance to deal with poor termination and poor cabling.
  • Integrated terminator, now enabled via software configuration

Technical Specifications

SCSI Interface

SCSI-2 Narrow 8-bit 50-pin connector.

SCSI FAST10 10MB/s synchronous transfers

SD Card InterfaceFull-size SD, tested up to 32GB

Up to 20MB/s

USB InterfaceFirmware updates, configuration, and mass-storage

USB 2.0 micro-B. Mass-storage at USB 2.0 FS speeds (1.2MB/s max)

Power5V via floppy 4-pin drive connector, USB, or self-powered using the SCSI host termination power.

2.35W maximum (500mA)

Dimensions (L x W x H)10cm x 9cm x 1.5cm
Performance

Up to 10MB/s under optimal conditions.
Worst-case performance is generally ~5.5 megabytes/second

Share your knowledge of this product. Be the first to write a review »